This topic has 4 replies, 3 voices, and was last updated 4 years, 2 months ago by Michael. Viewing 3 reply threads Author Posts 2020-August-29 at 23:05 #8892 mpeg2tomParticipant I’m curious if anyone has ever looked into making models of the Lectron component plastic cases for 3D printing? 2020-August-29 at 23:08 #8894 MichaelKeymaster Hello Mpeg2tom, Yes that has been done by a fellow Lectroneer’s friend! He created a 3D replica of the battery block white cover. I am sure the plastic case could be done too. Here is the discussion topic for you and welcome to Lectron.Info! A 3D replica of the battery block (white cover) 2020-September-02 at 15:08 #8897 LectronFanModerator Hi Thomas, It is indeed possible to create white covers for the blocks. The clear plastic cases are hard to reproduce since there’s no clear plastic filament yet. The idea was to reuse a basic clear bottom part and to print white covers for it. These can be labeled for the circuits inside. Many greetings This reply was modified 4 years, 2 months ago by LectronFan. 2020-September-02 at 20:23 #8903 MichaelKeymaster Thanks very much Frank for helping Tom out with his request. You’re the best! Michael. 2020-September-02 at 20:22 #8901 mpeg2tomParticipant There are some techniques for getting fairly transparent 3D prints, see this video. Do you have STL files available for the covers? Author Posts Viewing 3 reply threads You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Please enter an answer in digits:fourteen + nine = Enter something special: Log In