[LectronFanModerator]

And now some time for some more experiments 🙂

Lectron is such a great tool to do quick changes in your circuit, as following examples show off !

What do you think will happen when you try these changes ?

Try these out to see (and hear !)

• swap the capacitor of 0,47uF with the capacitor of 0,1uF mounted between points A & B.
• exchange the straight line block next to this 0,47uF capacitor with a capacitor of 10uF (+ to the right)
• swap this capacitor of 10uF with the choke coil
• replace the 5,6k resistor with a 100k resistor
• add a resistor of 120 Ohm between the volume potmeter and ground
• add the light bulb between the Emitter of T1 and ground

There are of course more experiments possible, maybe you can write these down in this forum.

Happy experimenting !

• This reply was modified 5 years, 2 months ago by Michael.
• This reply was modified 5 years, 2 months ago by Michael.
• This reply was modified 5 years, 2 months ago by Michael. Reason: Changed font and size styling for easier reading