LECTRON.info - The Ultimate LECTRON Information Resource and Online Museum
All text on Lectron.info is © by Michael Peters 2012

Raytheon Era

Model 820

The Model 820 was the deluxe LECTRON product offered by Raytheon during their first product phase during the Fall of 1967 and sold for $31.95. Deutsche Lectron, GmbH was the LECTRON manufacturer at this time and used the remaining Egger supplies for fulfillment requirements. This model was marketed as 'Electronic Dominoes'. The 820 model was later repackaged as the Series 3 with new packaging and cover graphics for Raytheon's second product phase.

The Model 820 used the 8100 styrofoam packaging for the blocks with a tape strip covering the middle row of block holes.

There were three shipped versions of the 820 which evolved as the Egger 8100 supplies were used up.

The first photo below shows an extremely rare early production run of the Raytheon 820 that I was very fortunate to acquire. If features the version 1 Egger 8100 styrofoam packaging and an Egger battery block with power switch, ornate silver foil strips over each row of the blocks on the right side (only existing on the version 1 of the Egger 8100), and the Egger badge.

The second photo shows a rare version of the 820 (used for the instruction manual's example photo) which I was able to acquire in April of 2013. Prior to the eBay auction, it had been purchased at a yard sale in West Virginia in 2012. The first row of blocks on the right now have six block spaces instead of 4, the silver decorative strips were omitted, and the Egger badge was omitted. The six block space mold was used for Egger's second version of the 8100. The bulb was also relocated from below the speaker to the fourth row of blocks, displacing the T connecting block.

The third photo shows the third and final version with Raytheon (Deutsche Lectron was the manufacturer) using the Braun white styrofoam block packaging during the production run once the Egger black packaging supplies were exhausted. The Egger battery box has been replaced with the Braun battery box. If you look in the upper left hand corner in the graphic below, you can see the embossed 8100 number.

The five experiments (23 - 27), which could only be done with the 820 kit, included a three transistor AM radio with loudspeaker.